13.2 Final Project
The 3D Dice I rolled were: Sound/Audacity, Play, and Sculpture.
I decided to make a guitar that plays sounds. To do this, I worked with Audacity, Scratch, makeymakey.com, and a MakeyMakey kit. This project involved a lot of trial and error. I first designed a guitar in photoshop, using a template I'd found online, and some design inspirations I also found online. Then, I used the 2D laser printer to cut out the guitar, which I regard as my sculptural element for the assignment. Then, I had to rig the guitar using the MakeyMakey technology. Next, I coded a scratch game. Lastly, I also rigged another guitar and tried playing an existing piano game on the makeymakey site.
You will find below various photos of the stages and methods. My first guitar broke, because it was acrylic and not strong enough. I had to reprint another guitar in wood to superglue and attach them. Now, the front is red acrylic and the back is the thin wood sheet. I broke many wires, experimented with how to attach them. Lots of trial and error and experimentation. I chose this project because I knew it would be rewarding, however very challenging. While it was time-consuming, I did have a lot of fun with this project and am certain that students would as well. Anyone teaching this project needs to give themself time and space to fail, experiment, and reiterate before delivering a lesson. This project involves many disciplines and scientific phenomena. It has tremendous artistic possibilities. And, in working with the MakeyMakey, one need not make a guitar, I've seen several videos with people using a range of conductive matter, including bananas.
This project engaged my personal learning objectives in that I expanded upon and challenge my perception of the difficulty and barriers to engaging and producing (works using) new media. MakeyMakey, Scratch, Audacity, Circuitry, and Laser Printing were all disciplines I used in this project, and they all challenged my confidence in cultivating creativity in new media.
Then, I programmed a scratch project, using various sounds (guitar riffs), including a track I made in Audacity.
My first guitar broke while I was working with it, so I had to reprint, and did so on wood. I also constructed a guitar using wood as a test after the first red one broke.
I decided to make a guitar that plays sounds. To do this, I worked with Audacity, Scratch, makeymakey.com, and a MakeyMakey kit. This project involved a lot of trial and error. I first designed a guitar in photoshop, using a template I'd found online, and some design inspirations I also found online. Then, I used the 2D laser printer to cut out the guitar, which I regard as my sculptural element for the assignment. Then, I had to rig the guitar using the MakeyMakey technology. Next, I coded a scratch game. Lastly, I also rigged another guitar and tried playing an existing piano game on the makeymakey site.
You will find below various photos of the stages and methods. My first guitar broke, because it was acrylic and not strong enough. I had to reprint another guitar in wood to superglue and attach them. Now, the front is red acrylic and the back is the thin wood sheet. I broke many wires, experimented with how to attach them. Lots of trial and error and experimentation. I chose this project because I knew it would be rewarding, however very challenging. While it was time-consuming, I did have a lot of fun with this project and am certain that students would as well. Anyone teaching this project needs to give themself time and space to fail, experiment, and reiterate before delivering a lesson. This project involves many disciplines and scientific phenomena. It has tremendous artistic possibilities. And, in working with the MakeyMakey, one need not make a guitar, I've seen several videos with people using a range of conductive matter, including bananas.
This project engaged my personal learning objectives in that I expanded upon and challenge my perception of the difficulty and barriers to engaging and producing (works using) new media. MakeyMakey, Scratch, Audacity, Circuitry, and Laser Printing were all disciplines I used in this project, and they all challenged my confidence in cultivating creativity in new media.
Results
I was able to get my guitar to play this piano: https://apps.makeymakey.com/piano/Then, I programmed a scratch project, using various sounds (guitar riffs), including a track I made in Audacity.
The Process
My first guitar broke while I was working with it, so I had to reprint, and did so on wood. I also constructed a guitar using wood as a test after the first red one broke.













Comments
Post a Comment